Simulation Anchor Stirrer
A simulation of mixing in an anchor stirrer can be done with NOGRID CFD software. The straight anchor stirrer in this case study is a tangentially conveying stirrer type and is mostly used for highly viscous media. The container shapes often have different degrees of slenderness and bottom shapes. This anchor stirrer has a flat bottom and is therefore only suitable for pressureless stirring processes. Containers with high slimness levels, such as in this case study, tend to be manufactured for big volumes. The anchor stirrer does not have a pronounced conveying effect since the contents of the vessel are only moved tangentially.
Mixing is an important part in food- and chemical industry and appears in processes such as dispersion of two or more liquid, powdery or gaseous ingredients, deagglomeration to avoid lumps and homogenization of mixtures.
Improve product performance and reduce costs
Mixing simulation can help to understand the flow in an agitator, to quickly suggest improvements to construction and operation parameters and to reduce production and maintenance expenses.
Compute any conceivable agitator geometry with mixing simulation
NOGRID offers a wide range of rheology models including those found in chemical industry. NOGRID's unique abilities to handle moving parts in the fluid domain allow the simulation of any conceivable agitator geometries and operation modes such as
- rotating and counterwise rotating agitator blades, possibly moving up and down periodically at the same time
- overlapping operation ranges of moving parts as found in twin-screw agitators
- free surfaces at inlets or for different fluid levels or for fast rotating agitators with high centrifugal forces
Benefit of very short computation time
The particular strengths of NOGRID's meshless CFD software are the rapid preprocessing (no grids need to be generated) and the outstanding short computation time even for complicated moving parts commonly found in agitators.
NOGRID unites abilities to handle free surface flow and moving parts in the domain. This leads to the following advantages:
- computation is in full 3D solving complete Navier-Stokes-Equations
- easy and intuitive setup also for FSI (Fluid-Structure-Interaction) cases
- free definable material properties by equations or curves
- evaluation of the mixing quality
- open or closed domains including inflow and outflow areas (non-batch mode)
- moving of the mixers in any direction
Easy and fast modelling: Build geometry, mesh boundary, setup the case and start computation
What is CFD from NOGRID?
CFD solves the fundamental equations that define the fluid flow process. With CFD software from NOGRID every engineer makes better decisions by predicting, analyzing and controlling fluid flow, heat and mass transfer or chemical reaction. By using NOGRID software for flow modeling you receive information on essential flow characteristics as for example flow distribution. Using it additional to testing and experimentation NOGRID software helps to improve the evaluation of your design – resulting in better construction and operation parameters, increasing planning security and money savings due to faster time to the marketplace for your product or process.
With NOGRID, you choose professional CFD software and services – our aim is helping you to be successful. When you decide to work with NOGRID you choose close cooperation with a dynamic, flat hierarchies-organization. Short information channels result in quick and accurate professional support and service. Our team consists of highly qualified employees, who are experts in fields such as numerical simulation or computational fluid dynamics. Based on our know-how, we are pleased to offer the following services, responding to your individual requirements:
In our two-days training courses you will learn, how to use NOGRID CFD software efficiently. Our technical support team will teach you how to handle and solve different cases.
For more details please refer to Training Courses →
We offer full professional support from the minute you start using our software, by telephone or by email. Contact us, when ever needed.
For more details please refer to Software Support →
Lack of time or resources and other constraints often make outsourcing an attractive solution. We help you with your flow modeling needs. Based on our engineering expertise in this field we offer individual numerical simulation services matching the unique needs of your organization.
For more details please refer to Simulation Services →